R4
Description of the menu options
Display and keyboard
The display shows status information and error messages issued by the device. The
following display modes are available:
B channel overview (one character per channel)
B channel status (one line per channel)
Device status / Device error messages
A total of six keys are available (cursor keys + "Mode" + "Clr"), as well as a two-line
display with 40 characters per line, of which 16 characters each are currently displayed.
Depending on the devices settings, the text information is displayed in German or
English.
B-channel-overview
In the B channel overview the channels are displayed in the form of a table. The
individual fields of the table have the following significance:
P: x (status of port 1, first B channel)
1: x (status of port 1, second B channel)
The following symbols are used for the channel status (shown by x in the table):
.
-
E (flashing)
A (flashing)
A
P (flashing)
P
N (flashing)
The cursor keys have no function in this mode.
B channel status display
The B channel status display shows an excerpt from a table with an entry for each B
channel. In the event of changes to the status of a channel, the table will jump to the
current entry if no cursor key has been used for at least 5 seconds. The status of the
channel is displayed in plain text, e.g.:
CH11: Connection LC_PPP
CH12: Remote station LC_PPP not responding
ELSA LANCOM Business
Channel idle (disabled)
Channel idle (enabled)
An error has occurred on the channel
Outgoing call
Connected (outgoing)
Incoming call
Connected (incoming)
Negotiation
P: X
P: X
P: X
2: x
3: x
4: x