Status/Info-Connection - ELSA LANCOM Business Manuel De L'utilisateur

R32 Description of the menu options
Below is a detailed description of the meaning of each field:
Ifc
Connection
Active
Passive
Errors
Con.-Time
Charge
The total charges incurred are not displayed directly. However, the charges are totaled
internally in order to permit the management of the charges budget (also see Setup/
Charges-module).

Status/Info-connection

The menu item Status/Info-connection has additional information on the current
connection status (logical remote station etc.) for every available interface. The table
maintained here has the following layout:
Ifc
Ch01
Ch02
Below is a detailed description of the meaning of each field:
Ifc
Status
Mode
ELSA LANCOM Business
Designates the associated channel.
Indicates the number of connections to the particular channel.
Indicates the number of connections actively established for the channel.
Indicates the number of connections established for the channel by incoming
calls.
Indicates the number of connection errors.
Indicates the period of time the current connection has existed. If no connection
exists, "No-connection" is output.
Indicates the amount of charges for the current connection. This value is reset to
zero when a new connection is established.
Status Mode Dialup-
remote
Ready
Ready
Designates the associated channel.
Indicates the status of the particular connection.
The possible values are: Init, Setup WAN, Ready, Dial, Incoming call, Protocol,
Connection, Callback, Bundle and Reserved. The Bundle status is indicated in
the display ELSA LANCOM Business 4100 by the addition of a "/2" in columns 15 and
16 of the associated display line. Bundle is displayed for the second interface either
when a bundle connection has been activated via the first interface or when a leased-
line connection with two B channels has been set. Reserved is displayed for the
second interface when a connection exists to the first B channel and the Y connection
has been deactivated.
Reflects the type of establishment. The following are possible:
Active (active call establishment = dialing)
Passive (passive call establishment = call acceptance)
CB (call establishment via callback)
Device-name B1-DT
0
0
B2-DT
0
0