Status/Lan-Statistics - ELSA LANCOM Business Manuel De L'utilisateur

R8 Description of the menu options
Throughput- The menu item Status/WAN-statistics/Throughput-statistics contains statistics of
statistics
bytes transferred over this interface for both channels. The table maintained here has
the following layout:
Ifc
Ch01
Ch02
Below is a detailed description of the meaning of each field:
Ifc
Rx/s current
Tx/s current
Rx/s average
Tx/s average

Status/LAN-statistics

Similarly to the previous menu option, this option allows you to display the statistics
relating to the LAN port. The Status/LAN-statistics menu has the following layout:
/LAN-statistics
LAN-rx-packets
LAN-tx-packets
LAN-rx-errors
LAN-tx-errors
LAN-stack-errors
LAN-NIC-errors
LAN-heap-packets
LAN-queue-packets
LAN-queue-errors
LAN-collisions
Link-active
Negotiation done
ELSA LANCOM Business
Rx/s current Tx/s current
0 0
0 0
Designates the associated channel.
Throughput on the channel in the last second in the receiving direction
Throughput on the channel in the last second in the transmission direction
Average throughput on the channel in the receiving direction
Average throughput on the channel in the transmission direction
Running status displays
Number of data packets received
Number of data packets sent
Number of data packets incorrectly received
Number of data packets incorrectly sent
Number of packets without a suitable receive module (bridge/
router)
Number of data packets discarded by the NIC
Number of buffers available
Number of buffers in use
Number of packets discarded due to a lack of buffers
Number of collisions during a send procedure
Display of correct Ethernet connection (data transfer possible).
Corresponds to the 'Link' LED on the device.
The negotiation of the transfer mode between the router and
the remote station is complete.
This is only relevant if Setup/LAN/Connection is set to 'Auto'.
Rx/s average Tx/s average
0 0
0 0