ELSA LANCOM Business Manuel De L'utilisateur page 189

Status/PPP-statistics/CHAP-statistics
The CHAP (Challenge Authentication Protocol) is the second option for verifying the
remote station under PPP. The password is checked as the connection is established and
again at adjustable intervals during the connection (refer also to Chapter 'Point-to-Point
Protocol'). Below is a detailed description of the meanings of the parameters for these
statistics:
Rx-discarded Number of CHAP packets discarded
Rx-challenge Number of CHAP challenge packets received
Rx-response Number of CHAP response packets received
Rx-success Number of CHAP success packets received
Rx-failure Number of CHAP failure packets received
Tx-retry Number of times the CHAP challenge packets were resent
Tx-challenge Number of CHAP challenge packets sent
Tx-response Number of CHAP response packets sent
Tx-success Number of CHAP success packets sent
Tx-failure Number of CHAP failure packets sent
Delete-values Deletes CHAP statistics
Status/PPP-statistics/IPXCP-statistics
When IPX is used, the IPXCP (Internet Exchange Protocol Control Protocol) indicates the
status of the protocol and the packets exchanged in the negotiation. Below is a detailed
description of the meanings of the parameters for these statistics:
Rx-discarded Number of IPXCP packets discarded
Rx-config-request Number of configure request packets received for IPXCP
Rx-config-ack. Number of configure acknowledge packets received for IPXCP
Rx-config-nak. Number of configure negative acknowledge packets received
Rx-config-reject Number of configure reject packets received for IPXCP
Rx-terminate- Number of terminate request packets received for IPXCP
request
Rx-terminate-ack. Number of terminate acknowledge packets received for IPXCP
Rx-code-reject Number of code reject packets received for IPXCP
Tx-config-request Number of configure request packets sent for IPXCP
Tx-config-ack. Number of configure acknowledge packets sent for IPXCP
Tx-config-nak. Number of configure negative acknowledge packets sent
Tx-config-reject Number of configure reject packets sent for IPXCP
Tx-terminate- Number of terminate request packets sent for IPXCP
request
Description of the menu options
ELSA LANCOM Business
R13