hergom Aranda Instructions Pour L'installation, L'utilisation Et L'entretien page 67

F. - SOOT chamber
A soot cleaning tool is provided with every
oven to clean the soot chamber located at the top of
the front section. It features a cover with the Hergom
anagram. The said cover is held in place by two
screws, which will have to be removed to access the
soot chamber.
G. - Cleaning the CHIMNEY
We recommend you inspect and clean the
chimney at least once a year, preferably at the start of
the season.
To facilitate cleaning, the oven has a cover in
the top section that can be removed by loosening the
four screws that hold it in place.
Industrias HERGÓM S.A. supplies a series of products for the preservation of its products:
- Refractory filler, to improve airtightness and sealing.
- Anti-soot, powerful catalyser that helps removal non-burnt waste.
- Lighting tables, a vital product when fast and clean lighting is required.
- Glass cleaner, the ideal treatment for removing grease from the glass on fireplaces,
chimneys, etc.
Below is a list of the most common problems that affect any type of fireplace. All these
problems can be corrected and, sometimes, only required slight adjustments to make the
oven work correctly. Remember that the weather affects the way your oven works.
If you have a newly built chimney.
a) The draw may be poor.
b) The diameter or height may not be correct.
c) The system may be partially blocked.
In the case of a previous chimney:
a) Soot may be obstructing the chimney partially.
b) There may be an internal or external crack through which air may be entering.
c) The diameter or height may not be correct for the new device.
V.- PRODUCTS FOR PRESERVATION .
VI.- PROBLEMS WITH THE DRAW
67