Symbols - GGP ITALY MC846 Manuel D'utilisation

SYMBOLS

2. SYMBOLS
1
4
1) Warning! Danger. The failure to use this ma-
chine correctly can be hazardous for oneself and
others.
2) Beware of kickback! Kickback is the rapid
and uncontrollable backward motion of the
chain-saw in the direction of the operator. Al-
ways work in complete safety. Use chains with
safety links that limit kickback.
3) Never hold the machine with one hand! Hold
the machine fast with both hands to control the
machine and reduce the risk of kickback.
EXPLANATORY SYMBOLS ON THE MACHINE (if present)
11
12
13
14
15
16
17
2 3
5 6
4) Read the instruction manual before using the
machine.
5) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
level of 85 dB (A) or higher. Wear earmuffs or
earplugs and a protective helmet.
6) Wear gloves and protective footwear!
11) Fuel tank
12) Chain oil tank and oil flow adjuster
13) Carburettor adjustments
L
H = high speed mixture adjuster
T - IDLE - MIN
14) Choke
15) Primer
16) Chain brake (the
17) Direction in which the chain is mounted.
= low speed mixture adjuster
= idle speed adjuster
the position in which the brake is released)
EN
symbol shows
3