Timex Cycle Trainer 2.0 Manuel D'utilisation page 21

To set up the custom pages:
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight PAGE SETTING, then press ENTER.
3. Highlight the custom page you want to configure, then press ENTER.
4. Press  or  to select the number of fields to display on the custom page, then press ENTER.
5. Press  or  to highlight a field, then press ENTER.
6. Press  or  to highlight the data to display in that field, then press ENTER.
7. Repeat steps 5 and 6 for each field.
This table describes the data that can display on custom screens.
data description
ALTI MAX highest altitude reached during this ride
ALTI MIN lowest altitude reached during this ride
ALTITUDE your current altitude above sea level
Asc SPEED rate at which you are gaining altitude
CAD AVG average RPM of bike crank
CAD INZN amount of time spent in your cadence zone
CADENCE current RPM of the bike crank
CAL RATE number of calories burned per hour
CALORIES calories burned
CUMULATE+ total gain in altitude
CUMULATE- total loss in altitude
DISTANCE total distance traveled
HR current heart rate
HR% current heart rate as a percentage of maximum
HR AVG average heart rate over the entire ride
HR INZN amount of time spent in your heart rate zone
HR MAX highest heart rate achieved during this ride
LAP DIST distance you have traveled during this lap
LAP PACE average pace for this lap
LAP SPEED average speed for this lap
LAP TIME time of this lap
ConFigUring the lap SCreen
You can also configure the data that displays in the message screen that displays when you take a split. There
are always two data fields in the lap screen, but you set the data that displays in these fields.
1. From the main menu, highlight CONFIGURATION, then press ENTER.
2. Highlight PAGE SETTING, then press ENTER.
3. Highlight SET LAP PAGE, then press ENTER.
4. Highlight one of the fields, then press ENTER.
5. Press  or  to highlight the data to display in that field, then press ENTER.
6. Repeat steps 4 and 5 for the second field.
This table describes the data that can display in the lap screen.
data description
LAP TIME time of this lap
LAP SPLIT total time of all laps in this ride
LAP DIST distance you have traveled during this lap
LAP SPEED average speed for this lap
data description
LAPS number of laps in this ride
PACE current time per mile
PACE AVG average time per mile averaged over the entire ride
PACE BEST fastest pace achieved during this ride
PACE INZN amount of time spent in your pace zone
PACER amount of time ahead or behind your target
PACER E time ahead or behind the trainer Trainer distance
PACER T time ahead or behind the trainer time
POWER current power output
POWER AVG average power in watts averaged over the entire
ride
POWER MAX highest power in watts reached during this ride
PWR ZONE amount of time spent in your power zone
PRESSURE barometric pressure at your current location
REST DIST distance to travel to achieve your goal
SLOPE steepness of current path (positive indicates uphill,
negative indicates downhill)
SPD INZN amount of time spent in your defined speed zone
SPEED current speed
SPEED AVG average speed averaged over the entire ride
SPEED MAX fastest speed achieved during this ride
TEMP current temperature
TIME time of day
data description
LAP PACE average time per mile for this lap
LP AVG HR average heart rate for this lap
POWER AVG average power in watts for the lap
21