Configuring Alerts - Timex Cycle Trainer 2.0 Manuel D'utilisation

ConfIgurIng alerTs

Set up alerts to let you know when your ride statistics fall outside a specified range. For example, to train for
endurance at a 15 mph, set the Speed Alert to sound when you go more than 17 or less than 13 mph.
time alertS
Set the Time Alert to notify you when a period of time has passed.
1. From the ACTIVITY menu, highlight SETTING, then press ENTER.
2. Highlight ALERTS, then press ENTER.
3. Highlight TIME/DIST, then press ENTER.
4. Highlight the TIME ALERT field, then press ENTER.
5. Highlight ONCE (to alert you when the time period first passes) or REPEAT (to alert you each time the period
passes), then press ENTER.
6. Highlight the ALERT AT field, then press ENTER.
7. Press  or  to change numbers, then press ENTER.
DiStanCe alertS
Set the Distance Alert to let you know when you have traveled the specified distance.
1. From the ACTIVITY menu, highlight SETTING, then press ENTER.
2. Highlight ALERTS, then press ENTER.
3. Highlight TIME/DIST, then press ENTER.
4. Highlight the DISTANCE ALERT field, then press ENTER.
5. Highlight ONCE (to alert you when you reach the distance the first time) or REPEAT (to alert you each time
you travel that distance), then press ENTER.
6. Highlight the ALERT AT field, then press ENTER.
7. Press  or  to change numbers, then press ENTER.
SpeeD alertS
Set the Speed Alert to help you train for a specific speed. The Alert sounds when you exceed the FAST setting
or fall short of the SLOW setting.
1. From the ACTIVITY menu, highlight SETTING, then press ENTER.
2. Highlight ALERTS, then press ENTER.
3. Highlight SPEED/PACE, then press ENTER.
4. Highlight the ALERTS field, then press ENTER.
5. Highlight SPEED, then press ENTER.
6. Highlight the FAST SPEED ALERT field, then press ENTER.
7. Highlight ON, then press ENTER.
8. Highlight the ABOVE field, then press ENTER.
9. Press  or  to change numbers, then press ENTER.
10. Repeat steps 6-9 for the SLOW SPEED ALERT and BELOW fields.
paCe alertS
Set the Pace Alert to help you train for a specific number of minutes per mile. The Alert sounds when your
pace is lower than the FAST setting or higher than the SLOW setting.
1. From the ACTIVITY menu, highlight SETTING, then press ENTER.
2. Highlight ALERTS, then press ENTER.
3. Highlight SPEED/PACE, then press ENTER.
4. Highlight the ALERTS field, then press ENTER.
5. Highlight PACE, then press ENTER.
6. Highlight the FAST PACE ALERT field, then press ENTER.
7. Highlight ON, then press ENTER.
8. Highlight the BELOW field, then press ENTER.
9. Press  or  to change numbers, then press ENTER.
10. Repeat steps 6-9 for the SLOW PACE ALERT and ABOVE fields.
18