Stopping The Trainer; Reviewing Rides; Checking Memory Capacity; Choosing Rides And Viewing Data - Timex Cycle Trainer 2.0 Manuel D'utilisation

Masquer les pouces Voir aussi pour Cycle Trainer 2.0:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59

sToppIng The TraIner

When you have reached the goal time and distance you set up when your started the Trainer, the Trainer ends.
A message displays indicating whether you met your goal or whether you need to speed up to achieve it next
time.
You can also stop the Trainer before the goals have been met.
1. Hold STOP for a few seconds.
2. Highlight YES, then press ENTER.

reVIeWIng rIdes

Every time you reset the timer in Speedometer mode (and in the Trainer, if you chose to record data), the ride
is saved. You can view it from the ACTIVITY INFO screens. Compare these saved rides against one another to
track your progress, or follow the routes of your favorite rides on the map.

CheCKIng memorY CapaCITY

From the ACTIVITY screen, you can find out how much memory is remaining on the device, and get an
estimate of how many more hours of rides can still be saved.
1. From the main menu, highlight ACTIVITY, then press ENTER.
2. Highlight MEMORY STATUS, then press ENTER.
A message displays indicating the number of memory points remaining and the estimated record time
available.
If you are about to take a ride that is longer than estimated available record time, delete one or more rides to
free up memory. See
Deleting a Ride

ChoosIng rIdes and VIeWIng daTa

View the list of rides from the ACTIVITY INFO screen, and select a ride to view in more detail.
1. From the main menu, highlight ACTIVITY, then press ENTER.
2. Highlight ACTIVITY INFO, then press ENTER.
3. Highlight TRAINING INFO, then press ENTER.
The list of saved rides by date and time displays. The time, distance, average speed, average pace, calories
burned, and average heart rate for the ride display at the bottom of the screen.
4. To view ride details, press  or  to choose a ride, then press ENTER.
The ride details screen displays. You can view all of the data saved from Speedometer mode.
To view other data that was recorded, but not visible in this screen, upload the data to Training Peaks. See
Uploading Rides to Training Peaks
or
Deleting All Rides from Memory
for more information.
13
for instructions.

Publicité

Table des Matières
loading

Table des Matières