General Device Functions; Switching On The Device - TechniSat DIGITRADIO 2 Mode D'emploi

5.4 General device functions

5.4.1 Switching on the device

> In order to guarantee good DAB+/FM reception, please fully extend the antenna
located on the rear of the device. To do so, please refer to Section 5.3.3.
> First prepare the DIGITRADIO for operation as described in sections 5.3.1 and
5.3.2.
> Press the On / Standby button on the top of the unit to turn on the DIGITRADIO 2.
After switching on the device for the first time, you must first set the [Language].
To do this, select one of the available languages using the < or > keys and
confirm the selection by pressing the OK key. The device then automatically
performs a full channel search in DAB+ mode. While scanning, the display
information shows the progress as well as the number of digital radio stations
detected. After completing the station scan the first DAB+ channel is played.
104