TechniSat DIGITRADIO 2 Mode D'emploi page 122

> The display will show [Bluetooth] and [Please pair].
> Now start the search for Bluetooth devices nearby on your external device. You
may need to enable the Bluetooth feature on your external device first.
Please refer to the operating instructions for your external device to activate the
Bluetooth function and perform a search on your external device.
During the pairing process, both devices should be within 10 cm of each other.
> DIGITRADIO 2 or DIGITRADIO 2S should now appear in the list of found
Bluetooth devices on your external device. Tap on the name of the radio to
complete the pairing process. If the pairing process is successfully completed, a
confirmation tone sounds from the DIGITRADIO's speaker.
> Depending on the external device, its name now appears in the display of the
DIGITRADIO. You can now start playing music on your external device.
122