Display Brightness - TechniSat DIGITRADIO 2 Mode D'emploi

12.2 Display brightness

You can set the display brightness for both operation and standby (only available when
the radio is connected to mains power).
> To do so, press the MENU button and use the < or > button to select
[Brightness].
> Press the OK button.
> Select one of the following functions using the < or > buttons, then press the OK
button:
[Operation] regulates brightness in normal operating status. You can choose
from the [High], [Medium] and [Low] brightness intensities. Use the < or >
buttons to select a brightness level and press the OK button to save. The setting
applies to both mains operation and battery power.
[Standby] regulates the brightness in standby mode (only relevant if the radio is
connected to the mains). You can choose from the [High], [Medium] and [Low]
brightness intensities. Using the < or > buttons, select a brightness intensity and
press the OK button to save.
130