Selecting Stations; Storing Dab+ Stations On A Memory Slot - TechniSat DIGITRADIO 2 Mode D'emploi

If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 5.3.3 / 3.2.1).

7.2.2 Selecting stations

> By pressing the <or > buttons, the station list can be called up and you can
switch between the available stations.
Depending on the setting under MENU > Change channel, the OK button must
then be pressed to play the selected station (alternatively: Channel change >
List) or the station will be played automatically (alternatively: Change channel >
Channel).

7.2.3 Storing DAB+ stations on a memory slot

The programme memory can save up to 20 stations in the DAB+ range.
> First select the desired station (see section 7.2.2).
> In order to store this station on a memory slot, keep the FAV button pressed
while playing. Then use the <, > buttons to select a station memory slot (1 - 20).
Press the OK button to save.
> Repeat this process to save additional stations.
112