Manual Setting - TechniSat DIGITRADIO 2 Mode D'emploi

> Use the < or > buttons to select the [Signal strength] item and press OK.
> Exit the menu by pressing the MENU button several times.
> The display shows the signal strength using a bar graph.
Stations with a signal strength below the required minimum signal intensity
are not transmitting a strong enough signal. Align the telescopic antenna as
described in section 5.3.3 if required.

7.2.7 Manual setting

This menu item is used to check the reception channels and can be used to position the
antenna.
> Briefly press the MENU button, use the < or > buttons to select the [Set
manually] item and press the OK button.
> Use the < or > and OK buttons to select a channel (5A to 13F). The signal
strength will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed. The antenna can now be
aligned to the maximum signal intensity.
114