Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. Align the dipole antenna, if
required, as described in Section 6.3.1.
9.2.7 Manual setting
This menu item is used to check the reception channels and can be used to align the
antenna. Furthermore, stations can be added manually.
>
Press the MENU button and use the / buttons to select the [Scan
settings] > [Set manually] entry, then press the OK button.
>
Use the / and OK buttons to select a channel (5A to 13F). The signal
intensity will now be shown on the display. If a DAB+ station is being received
on a channel, the station ensemble name is displayed. The antenna can now
be aligned to the maximum signal intensity.
Stations with a signal intensity below the required minimum signal intensity
are not transmitting a strong enough signal. Align the dipole antenna, if
required, as described in Section 6.3.1.
DE
EN
NL
FR
119