Manual Configuration - TechniSat DIGITRADIO 10 IR Mode D'emploi

16.1.1.2 Configuration via the WPS function
This establishes a direct connection to the router. Selecting and/or entering a WLAN
network
(SSID) and password is not required.
> Start the WPS function on your router as per the instruction manual.
> Then select [Use WPS via button] to launch the connection process.
Please observe the display overlays. The connection process is generally
completed in a few seconds and the WLAN connection can be used.
Alternatively the [Use WPS via PIN] function can be used if this function is
supported by the router.

16.1.1.3 Manual configuration

> Select [Set manually] and then [Wireless] to launch manual configuration.
DE
EN
NL
FR
141