Fm Mode; Switching On Fm Radio Mode; Fm Reception With Rds Information - TechniSat DIGITRADIO 10 IR Mode D'emploi

10 FM mode

10.1 Switching on FM radio mode

> Switch to FM mode by pressing the MODE button.
> [FM] is shown on the display.
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
To improve reception, readjust the dipole antenna (Section 6.3.1).

10.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown on the display. The device can show the RDS information RT
(Radio text), PS (Station name), PTY (Programme type).
122