Adjusting The Volume - TechniSat DIGITRADIO 10 IR Mode D'emploi

6.4.4 Adjusting the volume

> Set the volume using the VOL +/- buttons (15, 27) on the remote control.
The set volume is shown on the display by way of a bar chart.
> Press the Mute button (6) to immediately mute the sound. Press the button
again to return to the previously set volume.
When the volume is completely turned down (Mute), the device will switch to
standby mode after approx. 15 minutes.
DE
EN
NL
FR
107