Setting The Volume - TechniSat DIGITRADIO 10 C Notice D'utilisation

FM
Bluetooth

5.4.4 Setting the volume

> Set the volume using the VOL +/- buttons (15, 27) on the remote control.
The set volume is shown on the display by way of a bar diagram.
> Press the Mute button (6) to mute the sound immediately. Press the button
again to return to the previously set volume.
When the volume is completely turned down (Mute), the device will switch to
standby mode after approx. 15 minutes.
DE
EN
FR
NL
107