Date And Time Settings; Manually Setting The Date/Time - TechniSat DIGITRADIO 10 C Notice D'utilisation

> Open the menu and select using  /  > [System Settings]. Press the OK
button to open the system settings.

11.1 Date and time settings

11.1.1 Manually setting the date/time

Depending on the setting for time updates (Section 11.1.2), the date and time might
have to be set manually.
> Press the MENU button and select the [Time/Date] item in the [System
Settings] submenu.
> Press OK.
> Use the  /  buttons to select the [Set] item and press OK.
> The first numbers (day) flash and can be amended using the  /  buttons.
> Press the OK button to accept the setting.
> The next numbers of the date (month) then flash and can be amended as
previously described.
134