Fm Mode; Automatic Tuning; Manual Tuning; Save Favorites - TechniSat DIGITRADIO 210 Mode D'emploi

>Press Select (7).
>Select by pushing Tune up/down (6) the display, which will be shown in the bottom
line and press Select (7) to confirm.
• Signal strength - Signal strength
• Program type - PTY
• Ensemble - Ensemble, to which the radio belongs
• Frequency - Frequency at which the radio station is transmitted
• Signal quality - signal quality at
• Codec and bitrate - bitrate and encoding of the data transmission
• Date - the current date
• Scrolling text - text transmitted by the radio station, such as Title / Artist

FM mode

Automatic Tuning

>Press Tune up/down (6) for approx 2 seconds to search automatically for the next
station and play.
Please refer to the setting in the point - search settings. Depending on the setting
and reception quality at the site either stations may be skipped or very poorly repro-
duced. In this case try to align the wired antenna differently and/or change the search
setting.

Manual Tuning

>Push Tune up/down (6) as long as the frequency of the desired station appears.
After a moment, the station will be played and the channel and program information
will appear in the display in case of transmission from the station.

Save favorites

> To save a channel or station at a favorite memory place, push and hold the corre-
sponding channel button (3) till the display shows, that the channel is stored.
13