Fm Reception With Rds Information; Automatic Station Scan - TechniSat DIGITRADIO 2 Mode D'emploi

In the case of RDS stations, the station name appears.
Align the telescopic antenna to improve reception (Section 5.3.3).

8.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters
with RDS broadcast their station name or the programme type, for example. This is
shown on the display. The device can show the RDS information RT (Radio text), PS
(Station name), PTY (Programme type).

8.3 Automatic station scan

> Hold down the < or > buttons for longer (2 to 3 sec.), in order to automatically
search for the next station with a sufficient signal.
> Alternatively, you can press the OK button.
If an FM station with sufficient signal intensity is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, radio text.
DE
EN
FR
IT
NL
PL
CZ
117