Setting Up The Device - TechniSat DIGITRADIO 2 Mode D'emploi

4 Setting up the device

> Place the device on a firm, secure and horizontal base. Make sure the area is well
ventilated.
Caution!
> Do not place the radio on soft surfaces such as carpets and blankets or near to
curtains and wall hangings. These could obstruct the ventilation openings. The
necessary flow of air could be interrupted as a result. This could potentially lead
to fire in the device.
> Do not place the device near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
> Do not select a location for the device with high air humidity, e.g. a kitchen or
sauna, as the precipitation of condensation water could damage the device. The
device is intended for use in a dry environment and in a moderate climate and
must not be exposed to dripping or splashing water.
DE
EN
FR
IT
NL
PL
CZ
95