Internet Settings; Setting Up A Wireless Connection; Network Wizard Configuration; Configuration Via Wps Function - TechniSat 451 CD IR Mode D'emploi

15.2

Internet settings

> You can access and configure the network settings via MENU > Main Menu > System Settings > Internet Settings.
15.2.1

Setting up a wireless connection

To configure the network connection via WLAN, you have the option of using the network wizard or
doing this manually.
15.2.1.1

Network wizard configuration

> Select [Network Wizard] to launch this.
The network wizard now searches for all the wireless networks within range and displays them.
> Select the WLAN network you recognise and then select the preferred connection method.
[Press button]
[PIN]
[Skip WPS]
After selecting [Skip WPS], you can enter the password using the on-screen keyboard. Then select the [OK] field. If the
password entered is correct, a connection to the network is now established. The signal bars
display indicate whether a connection exists.
15.2.1.2

Configuration via WPS function

This establishes a direct connection to the router. Selecting and/or entering a WLAN network (SSID) and password is not
required.
> Start the WPS function on your router in accordance with its operating instructions.
> Then select [PBC WLAN Setup] to start the connection process.
Please pay attention to the display. The connection process is usually completed after a few seconds and the WLAN
connection can now be used.
102
Start WPS function (please refer to the procedure for your router)
Start WPS function with a PIN (please refer to the procedure for your router)
Enter the network key manually (you only need to enter it once)
in the status bar of the