Connecting To The Mains; Aligning The Telescopic Antenna - TechniSat 451 CD IR Mode D'emploi

Important instructions for disposal: Batteries may contain toxic substances that are hazardous to the environment.
Therefore, it is imperative to dispose of the batteries according to the legal provisions in force. Never dispose of the
batteries with normal domestic waste.
4.3.2

Connecting to the mains

> Insert the DC plug of the power supply unit into the socket labelled DC IN on the back of the DIGITRADIO. Then plug the
AC adapter into a 100-240 V ~ 50/60 Hz power socket.
Make sure that the operating voltage of the power supply unit matches the local mains voltage before you plug it into
the wall socket.
4.3.3

Aligning the telescopic antenna

The number and quality of broadcast stations depends on the reception conditions at the location of the radio. Excellent
reception can be achieved with the telescopic antenna.
> Extend the telescopic antenna to its full length and align.
Precise alignment of the telescopic antenna is often important, especially in peripheral areas of DAB+ reception. On the
Internet, you can quickly find the position of the nearest transmitter mast at www.digitalradio.de, for example.
Start the initial scan at a window facing the direction of the transmitter mast. In bad weather, DAB+ reception may be
limited.
Do not touch the telescopic antenna while a station is playing. This could compromise reception and lead to sound
dropouts.
74 74