Cancelling Pairing; Internet Radio; Last Listened To - TechniSat 451 CD IR Mode D'emploi

11.3

Cancelling pairing

Cancelling an active pairing must be done on your external device.
You can find out how to activate the Bluetooth function and carry out a search on your external device by consulting the
instruction manual for your external device.
You can then pair a new device as described in Section 11.2.

12 Internet radio

The DIGITRADIO 451 CD IR is equipped with an Internet radio receiver. In order to receive Internet radio stations/channels, you
need an Internet connection using a connection to a wireless network via a WLAN router. See Section 15.2 on how to establish
an Internet connection.
> Press the MODE button repeatedly until [Internet Radio] appears in the display.
If you are starting Internet radio operation for the first time without having configured a WLAN connection during the
initial installation, the Scan Wizard appears, showing you all the WLAN stations within range. Select the WLAN network
you recognise by pressing OK and enter the corresponding password using the virtual keyboard (skip WPS). Then select
and press the OK button. If the password entered is correct, a connection to the network is now established. The
signal bars in the status bar of the display indicate whether a connection exists. To cancel the input, select
and press the OK button. If you make a mistake, you can delete the last letter you entered by pressing
12.1

Last listened to

> Select MENU > Last Listened To to display a list of recently played stations.
> Select a station using the up/down arrow keys and press OK to play.
96
.