Pairing An External Device; Cancelling Pairing - TechniSat DIGITRADIO 3 Notice D'utilisation

If the radio has already been paired with another device which is within range,
the connection is automatically established. Depending on the connected
device, music playback may start automatically.

9.2 Pairing an external device

To pair an external device, for example a smartphone or tablet, with the DIGITRADIO
3, follow these steps:
> Start Bluetooth mode as described in Section 9.1.
> The display will show [Bluetooth] and [Please pair].
> Now start the search for Bluetooth devices nearby on your external device.
You may need to enable the Bluetooth feature on your external device first.
Please refer to the operating instructions for your external device to activate
the Bluetooth function and perform a search on your external device.
During the pairing process, both devices should be within 10 cm of each other.
> The entry DIGITRADIO 3 should now appear in the list of Bluetooth devices
found on your external device. Tap on the name of the radio to complete the
pairing process. If the pairing process is successful, a confirmation tone sounds
from the DIGITRADIO 3's speaker.
> Depending on the external device, its name now appears on the DIGITRADIO
3's display. You can now start playing music on your external device.
Depending on the Bluetooth protocol of your external device, you can control
the music playback using the playback buttons on the remote control.
Play/Pause
Next track
Previous track
Track from beginning
Volume
Alternatively, you can use the playback control for the music App on your
external device.

9.3 Cancelling pairing

In order to cancel active pairing, select MENU > Unpair and press the OK button.
Please note that the device to be unpaired must be connected to the DIGITRADIO 3 if
you want to unpair it. You can then pair a new device, as described in Section 9.2.
Alternatively, you can also cancel the pairing on your external device.
72
- button
- button
- 2 x button
- button
- buttons Volume +/-