Saving Fm Stations To A Memory Slot; Retrieving Fm Stations From A Memory Slot; Overwriting/Deleting A Station Memory Slot; Bluetooth - TechniSat DIGITRADIO 3 Notice D'utilisation

8.7 Saving FM stations to a memory slot

The station memory can save up to 20 stations within the FM range.
> First set the desired station frequency (Section 8.3, 8.4)
> In order to store this station on a memory slot, hold down the FAV button
during playback until [Favourite memory] appears in the display. Then use
the <, > buttons to select a favourite memory slot (1...20). Press the OK button
to save.
> Repeat this process to save additional stations.
You can also save stations to one of the numeric keypad keys by holding
down the corresponding button a little longer. The same applies to the direct
selection buttons on the device.

8.8 Retrieving FM stations from a memory slot

> To call up a station that you have stored in the FAV memory slots, briefly press
the FAV button and select a station slot (1...20) using the <, > buttons. Press
the OK button to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Alternatively, you can also use the relevant numeric key on the remote control
or the direct selection button on the device.

8.9 Overwriting/deleting a station memory slot

> Simply save a new station to the respective memory slot as described.
When restoring the factory settings, all memory slots are deleted.

9 Bluetooth

In Bluetooth mode, you can enjoy music from a connected smartphone or tablet via
the DIGITRADIO 3's speakers. To do so, the two devices must first be "paired" to each
other.

9.1 Switching on Bluetooth mode

> Change to Bluetooth mode by pressing the MODE button.
> [Bluetooth] is shown on the display.
When switching on for the first time, an external device (smartphone / tablet)
must first be paired.
DE
EN
FR
NL
71