Controlling Usb Playback; Selecting The Track; Quick Search - TechniSat DIGITRADIO 3 Notice D'utilisation

The display for the categorisation/folder depends on the structure on your
USB medium. As such, pay attention to the information on the display.
The MP3/audio files are read and shown on the display in the form of the
total number of tracks [T] and albums [F]. Do not start the operation until the
content has been read completely, to ensure that all the required information
on the memory medium has been read.
If no storage medium has been connected or it cannot be read, [No Device]
appears on the display.
If there is no playback, the DIGITRADIO 3 switches to standby after 15 minutes.

11.1 Controlling USB playback

> By pressing the Play/Pause
time flashes on the display), or continue playback by pressing it again.
> Use the Stop
on the display.

11.2 Selecting the track

> If required, select the categorisation or folder, and the subfolder it contains,
until you reach the track you want in order to play it.
> Folders/albums can be selected using the F- or F+ buttons on the remote
control.
> Use the Previous Track
or previous track.
The display shows the folder ([F]) and track ([T]) number set in each case.

11.3 Quick search

While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track
forwards or backwards within a track for as long as the button is held down.
button, you can pause playback (the playing
button to stop playback. The total number of tracks appears
or Next Track
or Next Track
buttons to skip to the next
buttons to quickly skip
DE
EN
FR
NL
77