Menu Navigation - TechniSat DIGITRADIO 3 Notice D'utilisation

Masquer les pouces Voir aussi pour DIGITRADIO 3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

In Bluetooth mode (the selected function is identified with an "*"):
[Status] (Device name), Track/Artist/Album, [Time] and [Date].
In CD/MP3/USB playback:
Folder, section/track number, runtime
ID3 on/off (show text information if available)
track, artist
>
Press the MENU button to exit the setting again and to return to the play view.
The display can also be changed by pressing the INFO button on the remote
control or Select/Snooze on the device multiple times.

6 Menu navigation

You can access all of the DIGITRADIO 3 functions and settings via the menu. Menu
navigation is performed using the MENU, BACK, <, > and OK buttons. The menu is
divided into submenus and, depending on the selected source, contains different
menu items or functions that can be enabled. To open the menu, simply press
the MENU button briefly. To switch to submenus, first press the < or > buttons to
display a submenu, then press the OK button to access the submenu. An asterisk (*)
highlights the current selection.
Closing the menu: Press the MENU or BACK button several times (depending
on which submenu you are in) until the current radio channel is displayed
again.
Settings are not saved until the OK button is pressed. If the BACK button is
pressed instead of this, settings are not accepted or saved (the MENU button
in this case acts as a "Back" button and you exit the menu).
The functions and buttons to be pressed are shown in bold in this instruction
manual. Displays are shown in [square brackets].
Some text (e.g. menu items, station information) may be too long to show on
the display. This will be then shown as running text shortly thereafter.
Instructions regarding controls on the device:
Both the VOL/STANDBY rotary knob and the SELECT/SNOOZE rotary knob can
be rotated and pressed.
Push the VOL/STANDBY rotary knob: Switching the device on/off
Rotate the VOL/STANDBY rotary knob: Adjusting the volume
Push the SELECT/SNOOZE rotary knob: Selection / OK / Info / Snooze
Rotate the SELECT/SNOOZE rotary knob: P+/- or <, >.
DE
EN
FR
NL
65

Publicité

Table des Matières

Dépannage

loading

Table des Matières