Switching Off The Alarm After Being Woken Up; Equalizer; Myeq; System Settings - TechniSat DIGITRADIO 3 Notice D'utilisation

13.2.2 Switching off the alarm after being woken up

> Press the On/Standby button on the remote control or VOL/STANDBY on
the device to switch off the alarm. Press the SELECT/ SNOOZE rotary knob to
activate the snooze function.

13.3 Equalizer

You can use the Equalizer* to adjust the sound according to your preferences.
> Hold down the MENU button and use the < or > buttons to select the
[Equalizer] item.
> Press the OK button.
> Use < or > to select [Optimal] for audio playback that is optimally tuned to
the device, or [MyEQ...] to set the treble and bass manually. Press the OK
button to accept the selection.

13.3.1 MyEQ

> Select Menu > Equalizer > MyEQ and press the OK button.
> Use the < or > buttons to select either [Treble], to adjust the treble, [Bass], to
adjust the bass, or [Loudness], to adjust the amplification of the sound at low
volumes. Then press the OK button.
> You can use the < or > keys to set a value between -7 and +7, and switch the
loudness function on and off. Press the OK button to apply the setting.

14 System settings

All settings explained in this section apply equally to all sources.

14.1 Date and time settings

14.1.1 Manually setting the date/time

Depending on the setting for time updates (Section 14.1.2), the date and time may
have to be set manually.
> Hold down the MENU button and use the < or > buttons to select the [Time]
item.
> Press the OK button.
> Use the < or > buttons to select the [Set Time / Date] item and press OK.
> The first digits (hours) of the time flash and can be changed using the < or >
buttons.
The > button increases the value, the < button decreases the value.
> Press the OK button to apply the setting.
DE
EN
FR
NL
81