Troubleshooting; Recipes - Unold SOFTI Notice D'utilisation

DE

TROUBLESHOOTING

EN
Problem
FR
Odour
NL
IT
ES
The mixer does not
turn
PL
The ice cream mix-
ture does not reach
the desired consist-
ency

RECIPES

Before making ice cream, fruit should be washed, peeled and cored if necessary.
After mixing, the ice cream mixture should still pre-cool for some time in the re-
frigerator. This is how to obtain an optimal ice cream result.
34 von 104
Copyright UNOLD AG | www.unold.de
Solution
May occur with the first use of the appliance.
If the odour should continue to occur after the
appliance is used several times, contact the customer
service department.
Check whether the appliance is connected to a
functioning electrical outlet as specified on the rating
plate, and is switched on.
If the ice cream mixture has become too solid, the
mixer stops turning. Switch off the appliance. Remove
the motor, lid and mixer and let the ice cream thaw
slightly. Remove it, e.g. with a plastic spatula.
The motor is overheated and has been switched off
automatically by the overheating protection circuit.
Unplug the power plug and allow the appliance to cool.
Remove the motor, lid and mixer and let the ice cream
thaw slightly. Remove it, e.g. with a plastic spatula.
If none of the causes cited apply, contact our customer
service department.
Check all recipe ingredients, mix them and ensure
that they are adequately pre-cooled.
If you are using alcohol, only add it to the ice cream
mixture when it has already reached the desired con-
sistency. If you add the alcohol too soon, it prevents
the ice cream mixture from solidifying.
Stand 20.2.2020