Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
The appliance cannot
be switched on.
The appliance shows
the error code E05.
The appliance shows
the error code E02.
26
Solution
Ensure that the appliance is plugged into an elec-
trical outlet.
Check whether the power cord is damaged. If the
power cord is damaged, for safety reasons do not
continue to operate the appliance. Have the appli-
ance inspected by our customer service organisa-
tion.
Check whether the appliance has been switched on
via the ON/OFF switch (keep the button depressed
for at least five seconds!).
Ensure that the water level is precisely between the
Minimum and Maximum mark. If not, switch off the
appliance and add water or remove some of the wa-
ter. Switch on the appliance again.
The digital thermostat is defective. Contact our cus-
tomer service department.
Copyright UNOLD AG | www.unold.de
Publicité
Table des Matières
