Disassembly, Cleaning And Care - Unold SOFTI Notice D'utilisation

DE

DISASSEMBLY, CLEANING AND CARE

EN
Before cleaning, always turn off the appliance and unplug it from the elec-
trical outlet.
FR
1. DO NOT clean the appliance, particularly the motor block under water or a
NL
different liquid. Do not use harsh or abrasive cleaning agents.
IT 2. The removable parts can be cleaned with warm water and a mild washing-up
liquid. The parts are not dishwasher-safe.
ES
3. To avoid injury/freezing, do not touch the cooling container with bare hands
when you lift it out of the appliance.
PL
Motor
4. Unlock the lid and take lid, motor and mixer off of the appliance.
5. Pull the mixer out of the motor.
6. Disconnect the motor from the lid. To do this, you must press both locking
tabs, on the underside of the lid/motor inward; this is the only way to take
off the motor.
7. Take the motor off of the lid.
8. Wipe off the motor with a damp cloth, and then dry it thoroughly.
Lid
9. Wipe off the lid with a damp cloth, and then dry it thoroughly.
1
2
3
1 Upper axle
2 Middle axle
3 Lower axle
4 Locking ring
5 Holder
6 Mixer blades
middle axle. Turn the blades of the middle axle counter-clockwise until it
detaches. The mixer blades can now be taken off.
32 von 104
Copyright UNOLD AG | www.unold.de
4
5
6
Mixer
10. Carefully pull the motor out of the
cooling container.
11. Clean the mixer with warm water and a
mild washing-up liquid.
12. You can take the mixer apart for easy
and thorough cleaning:
13. To do this, remove the lower axle on
the underside of the mixer by lifting
up the locking ring and detaching the
lower axle from the holder. Pull out the
lower axle.
14. This is the only way to detach the
Stand 20.2.2020