General Regulations And Directions - marposs E86N Manuel D'installation Et D'utilisation

1. GENERAL REGULATIONS AND DIRECTIONS

FOREWORD
This instruction manual provides all specific information necessary to familiarise yourself with and correctly use the MARPOSS
equipment in your possession.
The descriptions in this manual are intended for the following personnel:
• MARPOSS or Customer personnel who install the equipment.
• Customer technical personnel who operate directly with the MARPOSS equipment.
• Customer technical personnel responsible for maintaining the production line in which the MARPOSS equipment is installed.
A . T
LL RIGHTS RESERVED HIS MANUAL IS FOR INTERNAL USE BY THE
TESTING AND WARRANTY
Defects in the materials are covered by the warranty with the following limitations:
• T
ERM OF THE WARRANTY
• W
HAT IS COVERED BY THE WARRANTY
identification number used by MARPOSS.
The above-mentioned warranty is valid unless other agreements are reached between MARPOSS and the Customer.
GENERAL SAFETY REGULATIONS
The equipment was built in conformity with IEC EN60950 standards.
CONVENTIONS AND SYMBOLS USED
Several typographical conventions were used to draw up this manual.
Specifically, there are two types of safety warnings:
Warning:
Indicates the possibility of damage to the electronic unit and other devices connected to it, or the possibility of losing data.
Caution:
Indicates a hazard for the operator or technician.
Important information which may help you to understand and use the system appears in a box beside the word "Note" in bold type.
mida
: the warranty covers the product and all repairs carried out within the time limits agreed.
: the warranty applies to the product and its parts marked with the serial number or other
C . A
USTOMER ONLY NY OTHER USE IS PROHIBITED
.
53