Corghi R.E.M.O. COMPACT Manuel D'utilisation page 85

The procedure for measuring maximum
steering is completed when the STOP
signal appears on the screen:
Pressing ENTER it is possible to go to the
screen page recapping the measurement
of all the angles measured up to this
point on the vehicle:
To proceed with adjusting the vehicle's
regulators the system must be informed
that the lift will be raised. Select the icon
in the figure and press ENTER:
The following window opens with two EN
icons:
Get ready to raise the lift with the vehicle
on it:
Operator's manual R.E.M.O. COMPACT 85