Safety Regulations - Corghi R.e.m.o. Compact Manuel D'utilisation

WARNING
Before connecting the power supply plug to the
power panel make sure that the line voltage
is the same as indicated on the data plate of
the machine.

SAFETY REGULATIONS

The equipment is intended for professional
use only.
WARNING
Only one operator may work on the equipment
at a time.
WARNING
Failure to comply with the instructions and
danger warnings may cause serious injury to
operators and to others in the vicinity.
Before starting up the equipment, always ensure
you have read and understood all the danger/
warning signs in this manual.
Only qualified, authorised operators are capable
of using this equipment correctly. A qualified op-
erator is considered to be a person who has read
and understood the manufacturer's instructions,
is suitably trained, and is aware of the safety and
adjustment procedures for operations.
Operators must not use the equipment under
the influence of alcohol or drugs which may af-
fect their capacity. In all cases, it is essential to:
- Be able to read and understand all the infor-
mation in this manual.
- Have a thorough knowledge of the capabilities
and features of this machine.
- Keep unauthorised persons well clear of the
area of operations.
- Make sure that the equipment has been
installed in compliance with all the relevant
legislation and standards.
- Make sure that all system operators are suit-
ably trained, that they are capable of using
the equipment correctly and safely and that
they are adequately supervised during their
work.
- Do not touch power lines or electrical equipment
without first making sure that the power supply
has been disconnected.
- Read this manual carefully and learn how to use the
machine correctly and safely.
Operator's manual R.E.M.O. COMPACT
- Always keep this operator's manual in a place
where it can be readily consulted and to consult
it whenever appropriate.
WARNING
Do not remove or deface the Attention, Warning
or Instruction decals. Replace any missing or
illegible labels. Replace any missing or illeg-
ible decals. Missing or damaged decals can be
obtained at your nearest Corghi dealer.
- When using and carrying out maintenance on
the equipment, observe the standardised
industrial accident prevention regulations.
- Unauthorised alterations or changes to the
equipment relieve the constructor of all liabil-
ity for any consequent damage or accidents. In
particular, tampering with or removing safety
devices constitutes a breach of Safety at Work
Regulations.
WARNING
During work and maintenance operations,
always tie up long hair and do not wear loose
clothing, ties, necklaces, watches or any other
items that may become tangled in the moving
parts.
WARNING
Take particular care when crossing the manoeu-
vring space of the robotic units to avoid the risk
of injury caused by tripping over or colliding
with runways and floor ramps
WARNING
Infrared Radiation!
Avoid prolonged close-up exposure. Do not
observe directly with optical instruments. Do
not look directly at the light devices.
EN
55