Selecting A Location; Mud Guards - Truma Mover XT Instructions De Montage

5. Adapter kit AL-KO Vario III / AV
Essential for caravans with AL-KO Vario III / AV chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Figure 13
6. Adapter kit AL-KO M short to 1800 kg
For chassis with a permissible gross weight of up to
1800 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is required for mounting in
front of the axle when the chassis is set to the minimum length,
part no. 60031-00132.
Figure 14
7. Adapter kit AL-KO M to 1800 kg
For chassis with axial displacement with a permissible
gross weight of up to 1800 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is needed for mounting in
front of the axle,
part no. 60030-38600.
Figure 14a
8. Adapter kit AL-KO M 1900 – 2000 kg
For chassis with a continuous frame and a permissible
gross weight of 1900 kg - 2000 kg
For compensating for frame edges for caravans with
AL-KO chassis M. The adapter kit is needed for mounting in
front of the axle,
part no. 60031-02000.
Figure 15
9. Eriba Touring adapter kit
Part. no. 60030-09000
Figure 16
10. Eriba Touring Troll adapter kit
The Eriba Touring Troll adapter kit allows installation of the
Mover behind the axle on an Eriba Touring Troll caravan,
part no. 60031-03000.
Figure 17
11. Short mounting system
Replacement for standard mounting system if this cannot be
used due to lack of space and to compensate for the height
(30 or 60 mm) of substructures such as tanks.
Part. no. 60031-20000
Figure 18
12. Mud guard set (no illustration)
Replacement for the standard mud guards, if these cannot be
adapted to the Mover.
Part. no. 60031-08200
In some cases installation is not possible because of the
design of the sub-frame. Contact your dealer if necessary.
Detailed installation instructions are included with each
mounting set.
The vehicle frame must not be drilled or welded. Wheel sus-
pension parts must not be removed under any circumstances.

Selecting a location

The Mover XT should preferably be mounted in front of the
axle, but in exceptional circumstances (e.g. lack of space) it
is also possible to mount it behind the axle. The Mover XT2
should preferably be installed behind the axle Only use the
bolts provided (or the mounting parts available as special ac-
cessories) to attach the Mover XT / XT2.

Mud guards

When a Mover is fitted, the existing mud guards must be
moved / adapted if necessary (max. distance between tyre /
mud guard 300 mm).
If the original mud guards cannot be used, the Truma mud
guard set (part no. 60031-08200) must be used and adapted.
The mud guards are installed behind the axle. No mud
guards are required in front of the axle.
EN
25