User Management; Audit Trail - Hach ORBISPHERE 6110 Package Analyzer V3 Manuel D'utilisation Simplifié

Option
Clear audit trail
file
Clear result file

7.1.4.2 User management

1. The list of registered users (up to a maximum of 99) for this instrument are displayed. To have the
Delete and Edit options available, select one of the existing users.
Option Description
New To add a new user, all of the following fields must be entered, then select Ok to confirm:
• Name - Enter the user surname (3-15 characters)
• First Name - Enter the user first name (3-15 characters)
• ID - Enter an alphanumeric ID (1-10 characters)
• Password - Enter an alphanumeric password (3-15 characters)
• Security level - Select the security level from the drop-down list (see also the table below)
Edit or To remove or modify an existing user, select the user in the user management screen and
Delete select Edit or Delete as appropriate. To save all changes, press Ok or press the Exit button to
exit the screen without making any changes.
Level Available options
Operator Measurement and Analysis
Supervisor Calibration, Measurement, Analysis and Maintenance
Manager Configuration, Calibration, Measurement, Analysis and Maintenance
Administrator Configuration, Calibration, Measurement, Analysis and Maintenance
At startup all menus are locked and a valid ID and password combination is required to get
access beyond the standard measurement view. Refer to
Note: If the instrument security is enabled and the login credentials are not known, contact Hach Service
support with the recovery code to get the login credentials. The recovery code shows on the login window. The
supplied login credentials expire in one day. Make sure to change the login credential with known values.
Note: If access rights have been disabled (see
Administrator level and there will be no name recorded against any actions in the audit trail.

7.1.4.3 Audit trail

View the list of user actions performed on the instrument. The actions are listed chronologically with
the latest action always at the top of the list. When the maximum of 1,000 recorded actions is
reached, the oldest is deleted and replaced with the newest.
Scroll through the audit trail screens using the First, Previous, Next and Last buttons, or select the
Exit button to leave this option.
Note: To clear the audit trail file, use the option available in
7.1.4.4 Communication
This option sets the parameters required for exporting instrument data files to your PC or USB
storage device. Select from:
• Data download configuration (see
• Ethernet configuration (see
14 English
Description
This option deletes the audit file.
This option deletes the package measurement data.
Data download configuration
Ethernet configuration
Start up
Security management on page 13), all users are logged on at
Security management
on page 15)
on page 15)
on page 10.
on page 13.