Care And Cleaning - TOOLCRAFT 2331524 Notice D'emploi

Number Error code
13 ERR12
14 ERR13
15 ERR14
16 ERR15
17 ERR16
18 ERR17
19 ERR18

11. Care and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical
solutions, as these may damage the housing or stop the product from
functioning properly.
• Disconnect the product from the power supply before each cleaning session.
• Use a damp, lint-free cloth to clean the product.
• Do not touch the lens of the product with your hands.
• Clean the laser sensor with a small brush or a cotton bud moistened with
distilled water.
• Store and transport the measuring device in the storage pouch provided or
indoors.
• Check the battery status and recharge the battery regularly.
• Do not modify any optical parts of the product.
66
Error description
Internal hardware failure 3
Internal hardware failure 4
Internal hardware failure 5
Laser signal is unstable, strong flicker.
Internal hardware failure 6
Internal hardware failure 7
Invalid frame