Laser Safety - TOOLCRAFT 2331524 Notice D'emploi

• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
b) Laser safety
• When operating laser equipment, always ensure that the laser
beam is directed so that no one is in the projection area and that
unintentionally reflected beams (e.g. from reflective objects) cannot
be directed into areas where people are present.
• Laser radiation can be dangerous if the laser beam or its reflection
enters unprotected eyes. Before using the product, familiarise yourself
with the statutory regulations and instructions for operating this type
of laser device.
• Never look into the laser beam or point it at people or animals. Laser
radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and
move your head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue
to carry out tasks with safety implications, such as working with
machines or working from heights or close to a high voltage. Do not
operate any vehicles until the irritation has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The
uncontrolled, reflected beam may strike people or animals.
• Reflective or shiny surfaces in the application area must be covered
when using laser devices.
• Never open the device. Configuration or maintenance tasks must only
be performed by a trained specialist who is familiar with the potential
hazards. Improperly executed adjustments may result in dangerous
laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different
languages are included in the packaging. If the sign on the laser is not
in your local language, attach the appropriate sign to the laser.
43