Laser Safety - TOOLCRAFT LDM 20 J Notice D'emploi

c) Laser safety
• When operating laser equipment, always ensure that the laser beam is directed so
that no one is in the projection area and that unintentionally reflected beams (e.g.
from reflective objects) cannot be directed into areas where people are present.
• Laser radiation can be dangerous if the laser beam or its reflection enters un-
protected eyes. Before using the product, familiarise yourself with the statutory
regulations and instructions for operating this type of laser device.
• Never look into the laser beam or point it at people or animals. Laser radiation can
seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your
head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out
tasks with safety implications, such as working with machines or working from
heights or close to a high voltage. Do not operate any vehicles until the irritation
has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncon-
trolled, reflected beam may strike people or animals.
• Reflective or shiny surfaces in the application area must be covered when using
laser devices.
• Never open the device. Configuration or maintenance tasks must only be per-
formed by a trained specialist who is familiar with the potential hazards. Improp-
erly executed adjustments may result in dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages
are included in the packaging. If the sign on the laser is not in your local language,
attach the appropriate sign to the laser.
• Caution: Using equipment or procedures other than those described in these in-
structions could lead to exposure to dangerous radiation.
• Never leave the laser unattended during use. If possible, use barriers and parti-
tions to block access to public areas where you will use the laser, and mark the
area with warning signs.
• Do not use the laser at eye level.
LASER
2
Max. Output: <1 mW
Wavelength: 650 nm
EN 60825-1: 2014
23