Introduction; Explanation Of Symbols - TOOLCRAFT LDM 20 J Notice D'emploi

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory, national and European regulations.
To ensure that the product remains in this state and to guarantee safe operation, always follow
the instructions in this manual.
These operating instructions are part of this product. They contain important informa-
tion on setting up and using the product. Do not give this product to a third party
without the operating instructions. Keep these operating instructions in a safe place
for future reference.
If there are any technical questions, please contact: www.conrad.com/contact

2. Explanation of symbols

The symbol with an exclamation mark in a triangle is used to highlight important infor-
mation in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This symbol reminds you to read the operating instructions included with the product.
This product has been CE tested and therefore complies with the necessary national
and European regulations.
20