Care And Cleaning; Disposal; Product - TOOLCRAFT LDM 20 J Notice D'emploi

Error56 Received signal is too strong,
the surface is too reflective
Error57 Outside of the measurement
range
Error90 Device error

11. Care and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as
these may damage the housing or stop the product from functioning properly.
• The product does not require any maintenance. Never attempt to open or disassemble it.
Repair or maintenance work must be carried out by a specialist.
• Disconnect the product from the power supply before cleaning.
• Use a dry, lint-free cloth to clean the product. Do not allow water to get inside the housing.

12. Disposal

a) Product
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
Use a suitable target surface.
Repeat the measurement on a closer
target surface.
Turn the device on and off several
times.
If the symbol still appears, contact a
specialist.
33