Intended Use; Package Contents; Features And Functions - TOOLCRAFT LDM 20 J Notice D'emploi

3. Intended use

This product allows you to take simple and intuitive measurements of distances. It can also
measure surface areas and volumes. The device can take continuous measurements. In addi-
tion, the maximum and minimum can be determined from a range of measured values. Measure-
ment results are displayed in metric units (metres, square/cubic metres).
The product is intended for use in enclosed areas. It is not suitable for outdoor use in wet
conditions. Contact with moisture (e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit or fire. Read the operating instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
All company and product names are trademarks of their respective owners. All rights reserved.

4. Package contents

• Laser rangefinder
• Operating instructions
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads
or scan the QR code shown. Follow the instructions on the website.

5. Features and functions

• Precise and robust laser
• Measures distances from 0.2 to 20 m
• Measuring accuracy ± 3 mm
• Measures length, area and volume
• Continuous measurements (minimum and
maximum)
• Large multi-line backlit display
• Sound signal
21