Intended Use; Delivery Content; Symbol Explanations - TOOLCRAFT LDM 70 Mode D'emploi

1. Intended use

This product is designed for measuring distances, surface areas
and volumes. Readings can be added or subtracted. The indirect
measurement function enables the calculation of heights. The product
features an internal memory for up to 20 readings and a countdown
trigger function. The product should only be used in dry areas.
For safety and approval purposes (CE), you must not rebuild and/or
modify this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fi re, electric shock
etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.

2. Delivery content

• Laser odometer
• 2 x AA batteries
• Bag
• Carry strap
• Marker pen
• Operating instructions

3. Symbol explanations

The following symbols must be observed:
An exclamation mark within an equilateral triangle
indicates important information in the operating
instructions. Carefully read the whole operating
instructions before operating the device, otherwise there
is risk of danger.
This symbol indicates special information and advice on
operation of the device.
27