TOOLCRAFT LDM 70 Mode D'emploi page 29

• Do not point the laser beam at mirrors or other reflective surfaces.
The uncontrolled, reflected beam may strike people or animals.
• Never open the device. Setting or maintenance tasks must only
be executed by a trained specialist familiar with potential hazards.
Improperly executed adjustments might result in dangerous laser
radiation.
• The product is equipped with a class 2 laser. Laser signs in different
languages are included in the package. If the sign on the laser is not
written in the language of your country, please affix the appropriate
sign onto the laser.
• Caution: if operation settings or procedures other than those
described in these instructions are used, it could lead to exposure
to dangerous radiation.
Batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged
batteries might cause acid burns when in contact with skin, therefore
use suitable protective gloves to handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave the
battery lying around, as there is risk, that children or pets swallow it.
• All the batteries should be replaced at the same time. Mixing old and new
batteries in the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of
explosion!
29