Backlight; Optional Tripod - TOOLCRAFT LDM 70 Mode D'emploi

Laser pointer (F4)
1. Press and hold the button "Settings" for approx. two seconds. When
releasing the button, "F1" will be shown on the display.
2. Press the button "Settings" three times. The display will show "F4".
3. Press buttons "+" or "-" to activate/deactivate the laser pointer (K).
4. Press the button "On/Off" to exit the Settings menu.

18. Backlight

Press and hold the button "Countdown/Backlight" for approx. two
seconds to activate/deactivate the display backlight.

19. Optional tripod

On the back is a screw thread with a diameter of 1/4" to mount the device
on a tripod (available as an option).
42