Know Your Product; Symbols On The Product - Ryobi Expand-It RXPR01 Traduction Des Instructions Originales

operator should pay special attention to avoid the following:
■
Injury caused by vibration. Always use the right tool for
the job, use designated handles and restrict working
time and exposures.
■
Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
■
Contact with exposed saw teeth of the chain (cutting
hazards).
■
Unforeseen, abrupt movement or kickback of the guide
bar (cutting hazards).
■
Parts ejected from the saw chain (cutting/injection
hazards).
■
Thrown out pieces of the work piece (wood chips,
splinters).
■
Inhalation of saw dust and particles.
■
Skin contact with lubricant/oil.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 175.
1. Chain
2. Bar
3. Nut-hex
4. Sprocket cover
5. Scabbard
6. Oil tank cap
7. Short steel tube
8. Attachment hanger
6 | English

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Wear eye, ear and head protection.
Wear non-slip safety footwear when
using the product.
Wear non-slip, heavy duty gloves.
Do not expose to rain or damp
condition.
Electrical hazard, at least 10 m away
from the overhead electric-power lines
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area
Always remove the insert before using
the product.
Bar and chain lubricant
Moving direction of the chain
Conforms to all regulatory standards
in the country in the EU where the
product is purchased.
EurAsian Conformity Mark
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Ukrainian mark of conformity
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING