Residual Risk - Ryobi Expand-It RXPR01 Traduction Des Instructions Originales

corrosive agents such as garden chemicals and de-
icing salts.
■
Do not store outdoors.
■
When transporting the product in a vehicle, secure it
against movement or falling to prevent injury to persons
or damage to the product.
■
Never carry or transport the product while the engine
is running.
■
Abide by all government and local regulations for the
safety storage and handling of petrol.
SHORT TERM (LESS THAN ONE MONTH)
■
Stop the engine, and allow it to cool before storing.
■
Clean all foreign material from the product.
■
Cover the blade with the blade protector.
■
Store the product in a cool dry and well-ventilated place
that is inaccessible to children.
■
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
■
Do not store outdoors.
FOR ASSEMBLING WITH ELECTRIC-DRIVEN POWER
HEAD
■
Stop the machine, disconnect from the power supply
and wind the cable. Allow machine to cool before
storing or transporting
■
Clean all foreign material from the product. Store it in a
cool dry and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such
as garden chemicals and de-icing salts. Do not store
outdoors.
■
When storing the unit for a long period of time (one
month or longer), be sure the chain is lightly lubricated
to prevent rust. The manufacturer recommend the use
of Ryobi bar and chain lubricant which is available from
your Ryobi authorised service centre.
■
Cover the saw bar with the scabbard.
■
For transportation, secure the machine against
movement or falling to prevent injury to persons or
damage to the machine.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. For service we suggest you return the
product to your nearest authorised service centre for
repair. When servicing, use only identical replacement
parts.
WARNING
The saw chain is very sharp. To prevent personal
injury, exercise extreme caution when cleaning, fi tting
or removing the chain scabbard, and always wear
protective gloves when performing maintenance to the
chain.
WARNING
Improper chain maintenance increases the potential of
kickback. Failure to replace or repair damaged chain can
cause serious injury.
■
Switch off, and disconnect from the power supply (if
applicable), and make sure all moving parts have come
to stop before conducting any maintenance or cleaning
work.
■
You may make adjustments and repairs described
here. For other repairs, contact the authorized service
agent.
■
Follow instructions for lubricating and chain tension
checking and adjustment.
■
After each use, clean the body and handles of the
product with a soft dry cloth.
■
Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
Maintenance schedule
Daily check
Bar lubricant
Chain tension
Chain sharpness
For damaged parts
For loose fasteners
Fuel mixture or fuel and
lubricant (only for petrol
-driven power head)
Clutch engagement (only
for petrol-driven power
head) (no chain movement
at idling speed)
Power cable for damage
(only for electric-driven
power head)

RESIDUAL RISK

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
Before each use
Before each use and
frequently
Before each use, visual
check
Before each use
Before each use
Before each use
Before each use
Before each use
English | 5
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK